Soil testing using the dynamic cone penetration
To conduct the actual test, first place the dcp in a vertical position, with the tip of the cone resting on the soil. It is reasonably priced and the after-market service has been great. To do this, you will usually insert the bottom of the upper shaft into the anvil end of the lower shaft, line up the connecting-pin (or bolt) hole, and insert the pin/bolt, washer, and retaining clip. All these industrial testing equipments are easy to install and gives accurate results. If you do not have a measuring device with a built-in reference, you can do this by placing a ruler, straightedge, or other flat, rigid object on the soil close to the cone; it should remain in that position throughout the test.
Using the dcp: running the test
Soil testing using the dynamic cone penetration. The labquip dynamic cone penetrometer (dcp) is an instrument designed for the rapid in-situ measurement of the structural properties of existing road pavements constructed of unbound materials. Also included is one sfa-22 hardened point, manual & cd, and 3-in-1 oil. The resulting downward movement is then measured. Our customers can avail these industrial testing equipments at affordable rates.
Dynamic cone penetration testing
The black barn, white ox, scotland road,penrith, cumbria. Even more simply put, ‘how strong is the ground upon which we are going to build the road’.